Pure Aloha Adalah Dalam Bahasa Indonesia Artinya

Maximum Throughput of Pure ALOHA

The maximum throughput occurs when G𝐺=0.5.

The maximum throughput is thus−

$S_{max}$𝑎𝑥 = $0.5𝑒e^{-2*0.5}$ = $\frac{1}{2e}= 0.184$

Thus, it can be seen that the maximum throughput is only 18.4% in pure ALOHA.

Get certified by completing the course

The ALOHA protocol was first developed at the University of Hawaii in the early 1970s for packet radio networks. However, it can be used in any situation where multiple devices share a common communication channel. This protocol allows devices to transmit data at any time, without a set schedule. This is known as a random access technique, and it is asynchronous because there is no coordination between devices. When multiple devices attempt to transmit data at the same time, it can result in a collision, where the data becomes garbled. In this case, each device will simply wait a random amount of time before attempting to transmit again. The basic concept of the ALOHA protocol can be applied to any system where uncoordinated users are competing for the use of a shared channel.

ALOHA is an early computer networking method created at the University of Hawaii in the early 1970s. It’s a straightforward way to send data over a shared medium, like a wireless or wired network. The main idea of ALOHA is how it handles collisions, which happen when two devices try to send data at the same time, causing interference.

There are two main versions of the ALOHA protocol:

In this article we going to discuss pure ALOHA in detail.

Vulnerable period for packet A

Difference between Pure aloha and Slotted aloha

In this article, we will discuss the comparison between Pure aloha and Slotted aloha along with their separate discussion. Aloha is the random access protocol having two categories that are pure aloha and slotted aloha.

Pure aloha is used whenever data is available for sending over a channel at stations, whereas slotted aloha is designed to overcome the problem of pure aloha because there is a high possibility of frame hitting in pure aloha. Similarly, we will see the comparison chart between pure aloha and slotted aloha. So, without any delay, let's start the topic.

Before discussing the types of aloha, let's first see a brief description of aloha.

Aloha is designed for wireless LAN (Local Area Network) but can also be used in a shared medium to transmit data. In aloha, any station can transmit data to a channel at any time. It does not require any carrier sensing.

Pure aloha is used when data is available for sending over a channel at stations. In pure Aloha, when each station transmits data to a channel without checking whether the channel is idle or not, the chances of collision may occur, and the data frame can be lost.

When a station transmits the data frame to a channel without checking whether the channel is free or not, there will be a possibility of the collision of data frames. Station expects the acknowledgement from the receiver, and if the acknowledgement of the frame is received at the specified time, then it will be OK; otherwise, the station assumes that the frame is destroyed. Then station waits for a random amount of time, and after that, it retransmits the frame until all the data are successfully transmitted to the receiver.

There is a high possibility of frame hitting in pure aloha, so slotted aloha is designed to overcome it. Unlike pure aloha, slotted aloha does not allow the transmission of data whenever the station wants to send it.

In slotted Aloha, the shared channel is divided into a fixed time interval called slots. So that, if a station wants to send a frame to a shared channel, the frame can only be sent at the beginning of the slot, and only one frame is allowed to be sent to each slot. If the station is failed to send the data, it has to wait until the next slot.

However, there is still a possibility of a collision because suppose if two stations try to send a frame at the beginning of the time slot.

Pure aloha v/s slotted aloha

Now, let's see the comparison chart between pure aloha and slotted aloha. We are comparing both terms on the basis of characteristics to make the topic more clear and understandable.

From the above discussion, it can be said that slotted aloha is somewhat better than pure aloha. It is because there is less possibility of collision in slotted aloha.

So, that's all about the article. Hope it will be helpful and informative to you.

Frequently Asked Questions on Pure ALOHA – FAQs

Throughput of Pure ALOHA

The probability of successful transmission (S) can be derived from the probability that no other packets are sent during the vulnerable time period. This is given by:

Maximum Throughput of Pure ALOHA

The maximum throughput occurs when G=0.5

Smax=0.5 × e-1 ≈ 0.184

This means the maximum throughput of Pure ALOHA is approximately 18.4%. In other words, only about 18.4% of the time is used for successful transmissions, and the rest is lost due to collisions.

Key Features of Pure ALOHA

For more details please refer Derive the efficiency of Pure ALOHA protocol and Differences between Pure and Slotted Aloha article.

Pure ALOHA is an early and simple method for sending data over a shared network, where devices transmit whenever they have data to send. It doesn’t check if the channel is free, leading to frequent collisions when two devices send data at the same time. This results in a maximum efficiency of about 18.4%, meaning many transmissions are lost due to these collisions.

ALOHA is a medium access control (MAC) protocol for transmission of data via a shared network channel. Using this protocol, several data streams originating from multiple nodes are transferred through a multi-point transmission channel. There are two types of ALOHA protocols – Pure ALOHA and Slotted ALOHA.

In pure ALOHA, the time of transmission is continuous. Whenever a station has an available frame, it sends the frame. If there is collision and the frame is destroyed, the sender waits for a random amount of time before retransmitting it.

After transmitting a frame, a station waits for a finite period of time to receive an acknowledgement. If the acknowledgement is not received within this time,the station assumes that the frame has been destroyed due to collision and resends the frame.

A collision occurs if more than one frame tries to occupy the channel at the same time. The situation is depicted in the following diagram−